Monday, November 3, 2014

Making A Boat A Home - Hanging Curtains

Spacing the hooks
Well after two years, isn't it about time!???  Let's just say that my procrastination skills have not waned since moving aboard in November, 2012...

Interior decoration is not one of my strong suits either, unfortunately... So, when we finally decided to drag out the Sailrite and get to work on that curtain project I've been studiously avoiding, the hard work had already been done!






Our first attempt... 
Choosing our mounting method proved to be most difficult for us, and the reason for my procrastination.  I've seen so many great ideas for boat curtains, but it wasn't until we visited Dave and Melinda on our sister ship Salt & Light, that we found our method of choice.  They used dowels and cup hooks (I think), hidden behind the hand rails, to mount their curtains.  No drilling holes in the cabin liner!

But, when we started looking for the materials to use at the local home stores, we couldn't find any type of dowel that would be flexible enough to fit our curved walls, but small enough to fit in the tiny space.  We didn't want wood... So, we ended up with eye hooks and string, strung tightly between the hooks.

Once we had our method, we moved on to choosing the fabric... the second most difficult choice.  Back in Charleston when we had our car... we found a 50% off sale at Hancock Fabrics.  We headed for the heavier fabric aisles and started looking at our options...

I wanted to avoid lining our curtains, thinking that it would make scrunching too bulky for the small space.  So, we needed something that was heavy enough to provide privacy, but wouldn't make the cabin too dark inside.  We had to find something that would coordinate with our existing upholstery fabric (which is very dark) and provide some lighter tones to brighten the place up.  Bruce said "flowers are OUT", and since he voices few opinions, I was happy to oblige.  Many of the patterns Bruce liked (sailboats, maps) would have looked messy when scrunched.  We paced up and down the fabric aisle until we lucked onto the perfect fabric.

How much fabric to buy???  I had taken some rough measurements with me to the fabric store and threw myself on the mercy of the lady working the cutting table.  I told her the approximate width I would need covered, and the approximate height.  Add additional width for scrunching (she assumed 2-1 but that was too much - I ended up using half again the width for each panel).  Add height for my seams, throw in some extra for mistakes and maybe some accent pillows later... divide it all by the width of the fabric roll... and VOILA!  We walked out of there with our roll of fabric.

I drilled the holes and mounted the eye hooks
Back on the boat, the next challenge was to work out the spacing.   We considered how much room there was between ports and where we would scrunch the fabric when we open them.

These panels are truly "custom" and each one ended up being different from the others.  We have larger spaces between some ports, and very small spaces between others.  My original plan was to have the panels split in the center of each port...







Split in the center and too much fabric!
Once we finished with the first panel, I revised my plan.  We ended up having longer panels and sliding them to the large spaces between ports.

The first panel (pictured here) was done with 2/1 material width... It was just too bunchy, so all of the other panels used width + half width, which I think turned out to be plenty.


I sewed and mounted each panel before moving on to the next.  That way, I could make sure that each one fit the way I wanted it and apply changes as I went.  I measured the height at each end, laid out my material, measured and marked it for cutting.


Two of my panels were shorter at one end, so I had to make a slight slant... Luckily, the scrunching made this pretty forgiving so it wasn't much of a problem and I made the slant in the seam instead of in cutting the material.


The sewing was the easy part!  I hemmed each edge first, then folded, measured and pinned my top and bottom seams.


Since I only had a thin string to run through the top and bottom of each panel I made 1 inch seams.  That way they could hide behind the wood rails. When done sewing a panel, I used a safety pin to easily run my string through.












Port Side
We did the main saloon over two days and we're so happy with the way it turned out!  The boat looks more homey and inviting and we now have more privacy when staying in a marina.  I can also block out the glaring sun when I'm trying to cook!

Port Side - Curtains closed

Starboard Side looking forward

Starboard side looking aft

3 comments:

  1. Great step-by-step, Tammy! Thanks for sharing :)

    ReplyDelete
  2. Oh man! I bet that makes a huge difference. I sailed boat one time that had no curtains and let me tell you, they make down below really feel better. Great work, they look nice.
    Dani

    ReplyDelete
  3. Beautiful and so smart! I really like the way you installed your curtains! So simple and allows for the portholes to fully be open or closed...very clever! So glad that years later, your post is still up and inspiring! Thank you! Mel

    ReplyDelete